Bat-caddy X3 PRO Bedienungsanleitung PDF herunterladen (Seite 10)

6. Place the battery pack on the battery tray and fasten the Velcro strap around the

battery tightly. Insert the 3-prong battery plug into the caddy outlet so the notch

aligns properly. It is recommended NOT to fasten the screw on the plug to the

outlet, so in case of tip over the cable can unplug from the socket.

Note: Before connecting, make sure that the Rheostat Controller is in OFF (0)

position, and the remote control is stored securely!

4. Insert Anti-tip Wheel into frame holding bar and secure with pin.

7. Install optional accessories, such as Scorecard/Beverage/Umbrella holder, below

handle in the foreseen places or receptors. Separate instructions provided.

5. Unpack remote control and install batteries with plus and minus poles as indicated

in the diagram in the receiver compartment of the unit. Now you are ready to learn

and understand the functions of the manual and remote controls.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Keine Kommentare

Bat-caddy X3 PRO Bedienungsanleitung Seite 10