Bat-caddy X3 PRO Bedienungsanleitung PDF herunterladen (Seite 7)

X3 Pro

3. Attach wheels to axles by pushing wheel locking button on the wheel hub and

inserting the axle extension into the wheel. Make sure to keep the locking button

on wheel hub pushed in during this process, in order to enable the axle

extensions to be inserted all the way into the wheel so the axle sprocket locks

into the hub. If not locked in, the wheel will not be connected to the clutch and will

not be propelled or come off! Test the lock by trying to pull the wheel out. To

disassemble the wheels, proceed in reverse order.

Attention: Make sure that the right wheel (marked R) is attached to the right side

and the left wheel (marked L) to the left side (seen from behind in driving

direction), as the wheels have built-in one way clutches. The caddy will not move if

the wheels are not on the proper side. Reverse the action to remove the wheels.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

Bat-caddy X3 PRO Bedienungsanleitung Seite 7