Bat-caddy X3R Bedienungsanleitung PDF herunterladen (Seite 9)

3.3. Additional Functions:

3.3.1. Freewheeling Mode

The caddy can be easily operated without power. In order to activate the

freewheeling mode, turn main power Off. The caddy now can be pushed

manually without resistance. The freewheeling mode on some models can also

be activated by pulling out both rear wheels by 1/2 inch (1cm) and relocking

them back into the second axle groove. Some models are equipped with both

options.

3.3.2. Controller/Remote Frequency Synchronization

Sometimes it might be necessary to synchronize a new remote transmitter with

the caddy: Turn the caddy power On, press either forward or reverse button for

about 10 seconds while aiming the remote at the caddy. The caddy should start

moving now. On some older versions there is a green tuning button on one end

of the controller box located in the waterproof battery tray, accessible through a

latch in the top of the battery tray. In order to synchronize the remote set the

battery outside the tray but leave it connected, turn the caddy on and press and

Page 9 of 20

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

Bat-caddy X3R Bedienungsanleitung Seite 9